Menvier Security TSD402 User Manual page 23

TSD402 User Manual
Test Activation
The option allows the unit to simulate an alarm activation from one of the alarm channels (Fire, PA
or Alarm). When this test option is used the unit will go through the sequence of dialling all
telephone numbers until the call is acknowledged. The numbers it dials are dependent on how the
`Dialler Reporting Options' are configured (see page 25) and how the `Acknowledgement
Option' is set (see page 22). The example below shows the default operation.
Test Activation
Select the message to be
sent then press the
(e.g., press
send the Alarm message
SENDING A To No. 1
RINGING
PLAYING PHRASE 0
PLAYING PHRASE A
NO REPLY
acknowledgement
SENDING A To No. 2
RINGING
PLAYING PHRASE 0
PLAYING PHRASE A
NO REPLY
acknowledgement
SENDING A To No. 3
RINGING
PLAYING PHRASE 0
PLAYING PHRASE A
NO REPLY
acknowledgement
READY
[
key
9 [
then to
No reply or
No reply or
No reply or
Note:
Test Activations may be
cancelled at any time by
]
pressing the key.
CALL SUCCESSFUL
Call acknowledged
CALL SUCCESSFUL
Call acknowledged
CALL SUCCESSFUL
Call acknowledged
User Options
READY
21