Introduction; Control Panel Operation - Menvier Security TSD402 User Manual

TSD402 User Manual
Overview

Introduction

The TSD402 is a 5 zone (+ Final Exit) control panel with an integral Speech Dialler. It is ideally
suited for domestic and small commercial installations which require additional security through
the communication of audio alarm messages over the telephone line.

Control Panel Operation

Operation and programming is carried out from the tactile rubber keypad on the control panel in
conjunction with the 16 character Liquid Crystal Display (LCD).
The TSD402 incorporates a 3 button set facility which simplifies the setting and part setting of the
system for user. When the user wishes to full set the system, they simply enter the first 2 digits of their
passcode followed by the AWAY key. To part set the system, they simply enter the first 2 digits of
their passcode followed by the HOME key. When unsetting the system the user must enter all 4
digits of the passcode.
There are three passcodes which allow different access levels to the system:
Engineer Passcode
User 1
User 2
- This passcode allows the installation engineer access to the engineer
programming menu. It will be used by the installation company to
configure and test your system.
- This passcode allows the user to access the` User Options' menu as
well as setting and unsetting the system. The `User Options' menu
allows system testing, passcode defining/changing, part-set
configuration and Speech Dialler programming.
- This passcode allows the user to only set/part-set and unset the
system.
Overview
1