How To Use The Remote Control And The On-Screen User Interface - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

How to use the remote control and the on-screen user interface

The User guide for the video system describes in full detail how
to operate the video system using the TRC6 remote control.
The TRC5 remote control is not supported.
Access Selfview and Camera Control menu.
Access the System Information and Settings
menu (including Restart and Factory reset),
activate and deactivate Call forwarding,
Standby, and Do not disturb modes.
Indicates that at least one client is paired
to the video system using Proximity
System name or
contact information,
and time of day
Select Call to invoke
the contacts including
Favorites, Directory and
Recents lists; and to open
the Search or Dial field.
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals
Place call / Accept incoming call
Select Messages to
invoke the voice mail
system, if available.
Select Share to start
sharing content and to
conduct presentations.
Maintenance
Volume control and
Increase/Decrease control
Field selector / Cursor keys
Go back one step
Keypad
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
148
Administrator Guide
System settings Appendices Appendices
OK/Enter
Microphone mute/unmute
Reject incoming call /
End call / Cancel /
1 2 3
.@ abc def Back to Home screen
4 5 6
(outside calls)
ghi jkl mno
7 8 9
pqrs tuv wxyz
*
0 #
TRC6 remote
control
Operating tips
Use the Cursor keys to move about the screen.
Press OK/Enter to open the selected menu field.
Use the Cancel key to exit a menu (and return to the
Home screen), undoing any changes. Use the Back
key to go just one step back.