Cisco TelePresence SX20 Quick Set Administrator's Manual page 9

Cisco TelePresence SX20 Quick Set

Introduction Introduction
New features and improvements in CE9.0
Updated user interface
The user interfaces on the Touch 10, on screen, and on
integrated touch screens have been updated. The main
menu items on the home screen have been replaced with
more prominent activities.
Some of the settings have been removed from the Touch
10 advanced settings menu to align with the on-screen
display menu.
Wakeup on motion detection
Wakeup on motion detection senses when a person walks
into the conference room and the video system wakes up
automatically. You need to enable the following setting for
this feature to work:
xConfiguration Standby WakeupOnMotionDetection
You can't manually set the video system in standby when
this feature is enabled.
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals
Updated In-Room Control editor
The In-Room Control editor is updated with a new look,
improved logic and usability for producing a control
interface more efficiently. In addition, a new directional
pad widget and an In-Room Control simulator is added.
Added language support
We have added support for Potuguese (Portugal) to the
on-screen display and Touch controller menus.
Other changes
• Support for HTTPS client certificates has been added.
• Unplugging the presentation cable stops the
presentation sharing instantly.
Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
9
Administrator Guide
System settings Appendices