STEP 5: C
ONFIGURE
Follow the instructions for your Bluetooth stack. Configuration is only
needed the first time you connect the Bluetooth CRS to your PC.
Refer to your Bluetooth software manual for full instructions.
Note: SocketScan supports a generic Bluetooth COM port and may be able to
connect to Bluetooth stacks other than those listed.
Microsoft Bluetooth Stack:
1. Click on the Bluetooth icon in the task tray. In the pop-up menu,
click Add a Bluetooth Device.
2. The Add Bluetooth Device Wizard will begin. Make sure the
Bluetooth CRS is turned on. Check the box My device is set up
and ready to be found and click Next.
38
B
S
LUETOOTH
ETTINGS