Bluetooth Unpairing - Socket SOCKETSCAN 800 Series Manual

BLUETOOTH UNPAIRING

Unpairing the 800 Series: Deleting the Bluetooth Pairing
In most cases, if the 800 Series is paired with a device, you should
unpair it before trying to connect to a new device.
1. Power on the 800 Series.
2. Press and hold down the trigger button.
3. Press and hold down the power button.
4. After you hear 3 beeps, release both buttons.
The 800 Series will unpair and automatically power off. The next time
you power on the 800 Series, it will be discoverable.
Remove the 800 Series from the Bluetooth list in your iOS device
To Unpair the 800 Series on your device, go to Settings > Bluetooth,
i
tap next to the Socket CHS [xxxxxx] name, then tap
Device".
12
"Forget this