Step 5: Turn On The Bluetooth Crs - Socket 9M User Manual

4. Check the box Enable Cordless Scanner support. IMPORTANT!!!
5. Tap ok in the top right corner.
Note: If the Bluetooth radio is off, a message may report that ActivePairing
is not activated. Tap ok.
Note: After Cordless Scanner Support is enabled, the SocketScan icon will
have a blue circle.
STEP 5: T
URN ON THE
Press and hold the small power button on the left side of the wrist unit
until you hear 2 beeps (low – high).
Power button
Note: For more information on beeps and LEDs, see page 10.
After you turn on the Bluetooth CRS, it will have the following sequence
of Bluetooth modes until it connects to a computer:
Time after turning on scanner
0-5 minutes
5-20 minutes
20 minutes
22
B CRS
LUETOOTH
Bluetooth mode
Discoverable and connectable
Connectable
Scanner automatically powers off