Table of Contents
Advertisement
A
SSEMBLING AND
STEP 1:
Insert clip post into slot and gently push down. Repeat on other side.
Attach finger
strap to ring
unit.
Important! Do not twist the clips during insertion or removal!
Note: To remove, grasp a clip and gently pull out. Repeated removal
may distort the post and make it unusable.
STEP 2: Put on
The wrist strap can be worn on the right or left wrist. Adjust for a
wrist strap.
comfortable fit.
Note: A shorter, 6-inch strap is also available, SKU#.
STEP 3:
Plug the narrow end of the cable into the connector on the back
Connect cable
of the ring unit.
to ring unit.
CHAPTER 2: HARDWARE PREPARATION
P
UTTING ON THE
B
CRS
LUETOOTH
13
Advertisement
Table of Contents
