Step 3: Configure Bluetooth Settings - Socket CHS 7X User Manual

STEP 3: C
ONFIGURE
Follow the appropriate instructions for your Bluetooth stack. Configuration is only needed the first time you
connect the Bluetooth CHS to your PC. Refer to your Bluetooth software manual for full instructions.
Microsoft Bluetooth Stack with Windows Vista/XP:
1. Right-click on the Bluetooth icon
2. The Add Bluetooth Device Wizard will start and a welcome screen will appear. Check the box My device is
set up and ready to be found. Click Next.
3. After the search, select Socket CHS [xxxxxx]. Click Next.
Note: The characters in brackets are the last 6 characters of the scanner's Bluetooth Device Address, which is labeled inside the
battery compartment for the Bluetooth CHS 7X or 7XRx.
4. A passkey or pairing option screen will appear. Select Use the passkey found in the documentation and enter the
Be sure to enter four zeroes, not the letter "O").
default PIN 0000 (
5. Your computer will connect to the scanner. Status balloons will appear, reporting the connection progress.
After connecting, the Bluetooth CHS will beep once, and the LED will blink blue once every 3 seconds.
Microsoft Bluetooth Stack with Windows 7:
1. Right-click on the Bluetooth icon in the task tray. In the pop-up menu, click Add a Device and your
computer will automatically begin searching for Bluetooth devices in range and report found devices.
a. After the search, select Socket CHS 7x [xxxxxx]. Click Next.
Note: The characters in brackets are the last 6 characters of the scanner's Bluetooth Device Address for the Bluetooth CHS 7X or 7XRx
B S
LUETOOTH ETTINGS
in the task tray. In the pop-up menu, click Add a Bluetooth Device.
Click Next.