Step 8: Connect Computer To Bluetooth Crs - Socket 9M User Manual

STEP 8: C
ONNECT
1. Right or left-click the SocketScan icon at the bottom of the screen
and click Connect CS.
Note: The Connect CS option appears only if cordless scanner support
is enabled.
2. If you are using the Microsoft Bluetooth stack, a balloon may
report that a device is requesting to connect. Click on the balloon.
As prompted, enter the passkey 1234 to connect.
3. SocketScan will connect the computer to the
Bluetooth CRS.
4. The task tray icon at the bottom of your screen will
change to an image of a ring above a bar code to
indicate that SocketScan is connected to the
Bluetooth CRS.
Note: The CRS will remain powered on as long as it is connected to a host
computer.
CHAPTER 4: SETUP FOR WINDOWS XP & WINDOWS VISTA
C B
OMPUTER TO LUETOOTH
CRS
47