Optical Input Port - Receiver; Hdmi Output Port - Receiver - Lightware HDMI20-OPTC-TX220-Pro User Manual


  
5. Software Control – Using Lightware Device Controller
5.4.4. Optical Input Port - Receiver
Available Settings:
Port name,
▪
Reloading factory defaults (see factory default settings in the
▪
Factory Default Settings section).
INFO: Factory default settings have not effect on the emulated EDID.
HDMI20-OPTC series – User's Manual
5.4.5. HDMI Output Port - Receiver
Available Settings:
Change the name of the port;
▪
Mute/unmute the port;
▪
▪ Auto/DVI/HDMI signal type;
Enabling the +5V: Auto / Always on / Always off
▪
Output 1 conversion mode: No conversion / Convert to YCbCr
▪
4:2:0 / Split A: left, B: right / Split A: right, B: left. For more
information see Output Conversion Modes
INFO: Conversion mode setting effects only on HDMIOUT1A (O1)
and HDMIOUT1B (O2) port, so HDMIOUT2 (O3) port has not this
setting.
Factory default settings for the selected port.
▪
section.
26