Network Stack Configuration - Supermicro X11SPW-CTF User Manual

X11SPW-CTF/-TF User's Manual
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard SAS Option ROM
Select Enabled to enable SAS Option ROM support to boot the computer using a SAS device
specified by the user. The options are Disabled, Legacy, and EFI.
Onboard LAN Device
Use this feature to enable or disable Onboard LAN devices. The options are Disabled and
Enabled.
Onboard LAN1 Option ROM
Use this feature to select which firmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard LAN2 Option ROM
Use this feature to select which firmware function to be loaded for LAN Port2 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.

Network Stack Configuration


Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
92