Table of Contents
Advertisement
X11DPFR-S(N) User's Manual
Onboard SAS Option ROM
Use this feature to select which firmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard NVMe1 Option ROM
Use this feature to select which firmware function to be loaded for NVMe1 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard NVMe2 Option ROM
Use this feature to select which firmware function to be loaded for NVMe2 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard NVMe3 Option ROM
Use this feature to select which firmware function to be loaded for NVMe2 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard NVMe4 Option ROM
Use this feature to select which firmware function to be loaded for NVMe2 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. If this feature is disabled, it will not create
the Ipv4 PXE boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. If this feature is disabled, it will not create
the Ipv4 HTTP boot option. The options are Enabled and Disabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. If this feature is disabled, it will not create
the Ipv6 PXE boot option. The options are Disabled and Enabled.
92
Advertisement
Table of Contents
