Dimm Installation; Dimm Removal - Supermicro X11SPW-CTF User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots in the following
order: DIMMA1, DIMMD1, DIMMB1,
DIMME1, DIMMC1, DIMMF1. For the best
performance, please use the memory
modules of the same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
LE1
JUIDB1
VGA
LAN2
Intel
X557
BT1
Intel
C622
X11SPW-CTF
REV: 1.02
DESIGNED IN USA
USB6
JL1
JRK1
JPWR3
FAN5 FAN4
FAN7
FAN6
Release Tabs
Press both notches
straight down into
the memory slot.
35
Chapter 2: Installation
COM1
JIPMB1
USB7/8(3.0)
IPMI_LAN
LAN1
USB0/1
MH10
ASpeed COM2
AST2500
MH11
LEDM1
BAR CODE
LEDS1
LSI3008
(-CTF only)
JBT1 USB9(3.0)
USB4/5
M.2 PCI-E 3.0 X4
LE3
CPU
JTPM1
JSTBY1
LE2
SP1
BIOS LICENSE
FAN1
FAN3 FAN2
Notches