Supermicro X11SPW-CTF User Manual page 42

X11SPW-CTF/-TF User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10. NIC1 LED
and NIC2 LED are 2-pin NIC LED headers. Attach NIC LED cables to NIC1 and NIC2 LED
indicators to display network activities. Refer to the table below for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including IDE and SATA activities. See the table below
for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
PWR
Power Button
Reset
Reset Button
3.3 V
5V Stby
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
NMI
LAN1/LAN2 LED
Pin Definitions (JF1)
Pins Definition
9/11 Vcc
10/12 NIC2 Active LED/NIC1 Active LED
HDD LED
Pin Definitions (JF1)
Pins Definition
13 3.3V Stby
14 HDD LED
Power LED
Pin Definitions (JF1)
Pins Definition
15 3.3V
16 Ground
1 2
Ground
Ground
Power Fail LED
UID LED
1
NIC2 Active LED
NIC1 Active LED
2
3
HDD LED
4
PWR LED
Ground
19 20
42
1. NIC2 LED
2. NIC1 LED
3. HDD LED
4. PWR LED