Motherboard Features - Supermicro X11SPW-CTF User Manual

Motherboard Features

CPU
•
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA3647) processor with a thermal design power
(TDP) of up to 205W and 28 cores
Note: The X11SPW-CTF/-TF motherboard does not support FPGA or Fabric processors.
Memory
•
Up to 192GB of RDIMM, 384GB of LRDIMM, and 768GB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of
up to 2666MHz in six memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
•
Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel PCH C622
Expansion Slots
•
One (1) PCI Express 3.0 WIO Left X32 Slot
•
One (1) PCI Express 3.0 WIO Right X8 Slot
Network
•
Intel X557 10G PHY
•
Intel Ethernet Controller X722 for 10GBASE-T
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
•
ASpeed AST 2500 BMC
Graphics
•
Graphics controller via ASpeed 2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction