Processor And Chipset Overview; Special Features; Recovery From Ac Power Loss - Supermicro X11SPW-CTF User Manual

1.2 Processor and Chipset Overview

Built upon the functionality and capability of the Intel® Xeon 81xx/61xx/51xx/41xx/31xx series
(Socket P0-LGA3647) processor and the Intel PCH C622 chipset, the X11SPW-CTF/-TF
motherboard offers maximum I/O expandability, energy efficiency, and data reliability in a
14-nm process architecture, and is optimized for embedded storage solutions, data centers,
and high performance computing.
The Intel® Xeon 81xx/61xx/51xx/41xx/31xx and Intel PCH C622 platform supports the
following features:
•
ACPI Power Management Logic Support Rev. 4.0a
•
Intel® Turbo Boost Technology 2.0, Power Monitoring/Power Control, Turbo Time Param-
eter (TAU), and Platform Power Control
•
Configurable TDP (cTDP) and Lower-Power Mode
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0 with transfer rates of up to 6 Gb/s, xHCI USB with SuperSpeed 3.0
•
System Management Bus (SMBus) Specification, Version 2.0
•
Integrated Sensor Hub (ISH)The BMC supports remote management, virtualization, and
the security package for enterprise platforms
•
Intel Trusted Execution Technology (Intel TXT)
•
Intel Rapid Storage Technology
•
Intel Virtualization Technology for Directed I/O (Intel VT-d)

1.3 Special Features

Recovery from AC Power Loss

The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
19
Chapter 1: Introduction