Supermicro X11SPW-CTF User Manual page 16

X11SPW-CTF/-TF User's Manual
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
RAID (PCH)
•
SAS 3.0 (X11SPW-CTF only)
•
RAID (LSI3008)
Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB7/8)
•
Three (3) USB 2.0 headers for front access (USB2/3, USB4/5, USB6) (Not customized for front panel)
•
One (1) USB 3.0 header for front access (USB10/11)
•
One (1) USB 3.0 Type-A header (USB9)
BIOS
•
256 Mb SPI AMI BIOS
•
ACPI 4.0a, SMBIOS 2.7, BIOS rescue hot-key, Plug-and-Play (PnP), SPI dual/quad speed support, Riser card auto
detection support, RTC (Real Time Clock) wakeup
Power Management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Wake-on-LAN
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 21.)
•
Management Engine (ME)
•
ACPI Power Mangement
System Health Monitoring
•
Onboard voltage monitoring for +1.05V, +1.2V, +1.8V, +3.3V, +3.3V standby, +5V, +5V standby, +12V, VBAT, Memory,
PCH Temp., System Temp., Memory Temp.
•
CPU switch phase voltage regulator
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 205W (See Note 1 on next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Single cooling zone
•
Low-noise fan speed control
•
Seven (7) 4-pin fan headers
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) serial port on the rear I/O panel (COM1)
•
One (1) front accessible serial port header (COM2)
•
Ten (10) SATA 3.0 ports (I-SATA0~7, S-SATA0~1) supported by the C622
•
RAID 0, 1, 5, 10
•
Four (4) SAS 3.0 connections via LSI3008 with one mini-SAS HD (SAS0-3)
•
RAID 0, 1, 10
SM Flash UEFI BIOS
®
16