Replacing The Waste Toner Bottle - Konica Minolta MAGICOLOR 2300W User Manual

Replacing the Waste Toner Bottle

When the waste toner bottle becomes full, the message Waste Toner Box
Full appears in the Status Display. The printer stops and will not start again
until the waste toner bottle is replaced.
Removing the Used Waste Toner Bottle
1
Turn off the printer, then open the printer's front door.
2
Grasp the waste toner bottle's
handle and then lift the bottle out
and up to remove it.
Keep the waste toner bottle upright
so the toner does not spill.
3
Remove the two caps by turning
them counterclockwise.
4
Secure the two caps onto the two
holes by turning them clockwise.
5
Dispose of the used waste toner
bottle.
WARNING!
Dispose of the used waste toner bottle properly according to your local
regulations (do not dispose of it by burning).
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
55