[Emulation] - Konica Minolta bizhub 4050 User Manual

5.7 [Printer Settings]
Settings
[Halftone]
[Edge Enhancement]
[Edge Strength]
[Economy Print]
[Gradation Adjustment]
[Density]
[Print Darkness Adjust-
ment]

[Emulation]

To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Emulation]
Specify the default printer language or font.
Settings
[Default Emulation]
[PS Setting]
[Wait Timeout]
[Print PS Errors]
[PS Protocol]
[PCL Settings]
[Description of Utility Keys]
Description
Select the halftone processing method for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
• [Line Art]: Intermediate colors are reproduced with high precision.
• [Details]: Intermediate colors are reproduced in detail.
• [Smooth]: Intermediate colors are reproduced smoothly.
The following shows the default settings.
• [Image Printing]: [Details]
• [Text Printing]: [Line Art]
• [Graphics Printing]: [Details]
Select whether or not to sharpen edges for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
The following shows the default settings.
• [Image Printing]: [OFF]
• [Text Printing]: [ON]
• [Graphics Printing]: [ON]
Select the degree of edge enhancement when sharpening the edges.
[Medium] is specified by default.
Select whether or not to adjust the printing density in order to save the amount
of toner consumed.
[OFF] is specified by default.
Adjust gradation when reproduction quality of the printed image is degraded.
Adjust the density of black in highlight portions, intermediate portions, and
shadow portions.
[0] is specified by default in every case.
Adjust the shading of a printed image.
[0] is specified by default.
Description
Select the Page Description Language. When you select [Auto], this machine
automatically switches between PCL and PS.
[Auto] is specified by default.
Configure the PS print settings.
Specify the time-out period after it is judged as a PS error.
If you select [0], time-out will not work.
[0] is specified by default.
Specify whether or not to print error information when an error occurs during
PS rasterization.
[OFF] is specified by default.
Select the protocol that is used for PS data communication.
If you select [Auto], an appropriate protocol is automatically determined from
the PS print jobs.
[Auto] is specified by default.
Configure the PCL settings.
5
5-21