ICP DAS USA tDS-722 User Manual page 67

Tiny Serial-to-Ethernet Device Server
Follow the procedure described below:
Step 1: Connecting to a network, a PC and a Power Supply
1. Confirm that the tDS-700 module is functioning correctly. Refer to
700 Module for more details.
2. Connect both the tDS-700, TCP server (PC #2) and hyper terminal (PC #1) to the same sub
network or the same Ethernet Switch. For detailed RS-232/RS-422/485 wiring information, refer
to section 2.7 "Wiring Notes for RS-232/485/422 Interfaces".
The wiring diagram is as follows:
Figure 5-9
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
Chapter 3 Setting up the tDS-
- 67 -