Restore Factory Defaults - ICP DAS USA tDS-722 User Manual

Tiny Serial-to-Ethernet Device Server

4.3.3 Restore Factory Defaults

Use the following procedure to reset all parameters to their original factory default settings:
Step 1: Click the "Restore Defaults" button to reset the configuration.
Step 2: Click the "OK" button in the message dialog box.
Step 3: Check whether the module has been reset to the original factory default settings for use
with the VxComm Utility. Refer to
The following is an overview of the factory default settings:
Factory Default Settings
Network Settings
IP Address 192.168.255.1
Gateway Address 192.168.0.1
Subnet Mask 255.255.0.0
DHCP Disabled
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
Chapter 3 Setting up the tDS-700 Module

Basic Settings
Alias
for more details.


Tiny
- 41 -