Tiny Serial-to-Ethernet Device Server
6. CGI Configuration
The tDS-700 series can be configured via convenient URL commands. This section lists the
commands in URL format corresponding to the basic functions of tDS-700. Please make sure you
have correctly configured the network settings for the tDS-700 before using CGI configuration.
(Please refer to
Chapter 3 "Setting up the tDS-700 module"
6.1 CGI URL Syntax
Type the CGI URL syntax in the browser, as follows:
Syntax:
http:// < IP address of tDS-700>/< CGI >?<Parameter Name>=<Value>
http://10.0.8.6/assign.cgi?baud0=115200&format0=8n1
Example:
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
about the Ethernet settings.)
Please refer to Sec. 6.2 CGI Command List
1. Type the CGI command in the browser.
2. Complete
- 74 -