ICP DAS USA tDS-722 User Manual page 71

Tiny Serial-to-Ethernet Device Server
3. Click on "Socket"  "Listen".
4. Type the IP address and port number of the TCP Server (PC#2) in the "Server IP" and "Port
Number" field (for example "10.0.8.21" and "500").
5. Click the "Echo Messages Back To Client" check box.
6. After clicking the "OK" button, the server will begin listening on the specific IP/Port. This will be
indicated an "Open" line in the TCP/IP Test Server dialog box.
Figure 5-15
Figure 5-16
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
3. Click 4. Type the IP address and
Port number of TCP server
6. Click
5. Click
- 71 -