General Settings - ICP DAS USA tDS-722 User Manual

Tiny Serial-to-Ethernet Device Server

4.3.2 General Settings

The General Settings provides functions allowing items such as the Alias Name, System Timeout
value, UART Watchdog value, Auto-logout value, Debug Message and CGI Configuration to be
configured.
The following is an overview of the parameters contained in the General Settings section:
Item
Network
Ethernet Speed
System Idle
(Network Watchdog)
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
This parameter is used to set the Ethernet speed. The
default value is Auto (Auto = 10/100 Mbps Auto-
negotiation).
This parameter is used to configure the system timeout
value. If there is no activity on the network for a specific
period of time, the system will be rebooted based on the
configured system timeout value.
Timeout value range: 30 to 65535 (seconds); Disable = 0.
Description Default
Auto
300
- 39 -