ICP DAS USA tDS-722 User Manual page 69

Tiny Serial-to-Ethernet Device Server
2. Click the "Port1" link to enter the settings page.
3. Select the appropriate Baud Rate and Data Format settings from the relevant drop down
options, for example "115200" , "8", "None" and 1" .
4. The pair-connection settings area as follows:
4-1: Select "Client" from the "Application Mode(Server Mode)" drop down options
4-2: Type the IP address of the TCP Server (PC #2) in the "Remote Server IP" field.
4-3: Assign a TCP port for the TCP Server (PC #2) in the "Remote TCP Port" field.
5. Click the "Submit" button to complete the configuration.
※ Refer to
Figures 5-13
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.

Figure 5-12
for an illustration of how to perform the above steps.
- 69 -