Tiny Serial-to-Ethernet Device Server
3.
Enter the network settings information, including the
and then click
seconds. If you don't know the correct network configuration information, contact your
Network Administrator to obtain the details.
Step 4: Configuring the Virtual COM Ports
1. Wait 2 seconds and then click the "Search Servers" button again to ensure that the tDS-700 is
working correctly with the new configuration.
for the M4 version module.
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
"OK"
button. The new settings for the tDS-700 will take effect within 2
Click your tDS-700 in the list
IP, Mask and Gateway
Note that the tDS-700 display name is "_RevB"
addresses,
- 29 -