ICP DAS USA tDS-722 User Manual page 65

Tiny Serial-to-Ethernet Device Server
2. Execute the Test2COM.exe program.
1. Double Click Test2COM.exe
2. Type COM1\COM2
3. Check Data Bits: 8
4. Check Parity: None
5. Check Stop Bits: 1
6. Uncheck
The Baud Rate and data format depend on the serial port settings for the web
configuration above.
Note
Figure 5-8
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
7. Check Baud Rates: 115200
8. Loop: 10
9. Click "Start Test"
10. Test Results: "Failed Test: 0"
Figure 5-7
- 65 -