Table of Contents
Advertisement
BDisplay Selector Switch
Press the display selector switch while the engine is
running. The LCD meter display will change from one
indication mode to the other.
Change the two-mode display according to your jobs.
(1) Display selector switch
C AUX port in use
(1) Display selector switch
A Even with the starter key not yet inserted, press the
electronic meter's user setting switch or the display
selector switch, and the LCD display shows the hour
meter, fuel gauge, water temperature gauge and clock
for 10 seconds.
CHECKS BEFORE START
BLCD Display for Normal Operation
C Fuel gauge
To avoid personal injury:
A Before adding fuel, be sure to stop the engine.
A Be sure to keep open flame away from the
machine. Otherwise a fire may result.
With the starter key at the "RUN" position, the fuel
remaining in the fuel tank is indicated in the block.
(1) Fuel gauge
If the fuel runs short, open the cap and refuel the tank.
(1) Fuel cap
A If the fuel gauge indicator is near the "E" or the
"FUEL" message appears, add fuel as soon as
possible. If the indicator is near "E" and the machine
is operated on a slope, the engine may run out of fuel.
7
Advertisement
Table of Contents
