Public Ip Access Control Menu - SMC Networks SMCD3GN3 Administrator User Manual

8. To change the settings for a subnet, click the radio button to the left of the subnet you want
to change and click the Edit button. When the Adding Public Lan menu appears, edit the
IP address and subnet mask as necessary and click Apply. Click Apply in the Additional
Public Lan menu to save your settings.
9. To delete a subnet, click the radio button to the left of the subnet you want to delete and
click the Delete button. No precautionary message appears before you delete a subnet.
Click Apply in the Additional Public Lan menu to save your settings.

Public IP Access Control Menu

Using the Public IP Access Control menu, you can block specific pubic IP addresses from
accessing the Internet.
To access the Public IP Access Control, click LAN in the menu bar and then click the Public
IP Access Control submenu in the menu bar. Figure 29 shows an example of the menu
and Table 10 describes the settings you can select.
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
錯誤! 尚未定義樣式。
Figure 29. Public IP Access Control Menu
60