SMC Networks SMCD3GN3 Administrator User Manual page 37

Option
Disable All Commercial Enables or disables all commercial Gateway functions.
Gateway Functions
•
•
Router Name The name you want to assign to the Gateway. Assign a name so that this device will not be confused
with other devices on your wireless network. We recommend you use a name that is meaningful to you
so you can identify the Gateway easily.
Use router name for Determines whether the router name you specified appears in DOS command line prompts (for
command line prompt example, if you Telnet into the Gateway).
•
•
Enable UPnP Configures the Gateway as a Universal Plug and Play (UPnP) Internet gateway. UPnP allows for
dynamic connectivity between devices on a network. A UPnP-enabled device like the Gateway can
obtain an IP address, advertise its capabilities, learn about other connected UPnP devices and then
communicate directly with those devices. The same device can end its connection cleanly when it
wishes to leave the UPnP community. The intent of UPnP is to support zero-configuration, "invisible"
networking of devices including intelligent appliances, PCs, printers, and other smart devices using
standard protocols.
•
•
Enable HNAP Configures the Gateway as a Home Network Administration Protocol (HNAP) device. HNAP allows the
Gateway to be configured and managed by remote entities, such as Network Magic or any software
application that discovers and manages network devices.
•
•
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
錯誤! 尚未定義樣式。
Table 4. System Settings Menu Option
Checked = all commercial Gateway functions are disabled.
Unchecked = all commercial Gateway functions are enabled. (default)
Checked = router name appears in command line prompts.
Unchecked = router name foes not appear in command line prompts. (default)
Checked = UPnP is enabled on the Gateway. (default)
Unchecked = UPnP is disabled on the Gateway.
Checked = HNAP is enabled on the Gateway.
Unchecked = HNAP is disabled on the Gateway. (default)
37
Description