Customer Ui Setup Menu - SMC Networks SMCD3GN3 Administrator User Manual

Table 6. Remote Management Settings Menu Options
Option
WAN IP Address
Http Port
Telnet Port
Https Port
SSH Port
Mso remote management
Customer remote management
Limit remote management to

Customer UI Setup Menu

The Customer UI Setup menu lets you select which menus, submenus, and configuration
options are shown to (Enable) or hidden from (Disable) users. Using this menu, for example,
you can hide options that, if changed by users, could adversely affect the Gateway. These
settings do not affect the configuration options displayed for administrators. A Reset to
Defaults button at the bottom-left side of the menu lets you return the parameters on this
menu to their factory default settings.
To access the Customer UI Setup menu, click System in the menu bar and then click the
Customer UI Setup submenu in the menu bar. Figure 21 shows an example of the menu.
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
錯誤! 尚未定義樣式。
IP address used to access the Gateway's Web management interface via the Internet. For
example, if the WAN IP address is 123.45.67.8 and the Web management port is 8080,
remote users type http://123.45.67.8:8080
change the value shown, check the box to the right of this option and enter a new value.
Port number used to access the Gateway's Web management interface. Range is from 1024
to 65535. Default is 8080. To change the value shown, check the box to the right of this option
and enter a new value.
Port number used to Telnet into the Gateway. Range is from 1 to 65535. Default is 2323. To
change the value shown, check the box to the right of this option and enter a new value.
Port number used to access the Gateway via a secure HTTPS connection. Default is 8181.
To change the value shown, check the box to the right of this option and enter a new value.
Port number used to access the Gateway via a Secure Sockets Shell (SSH) connection.
Default is 2222. To change the value shown, check the box to the right of this option and
enter a new value.
Enables or disables remote access to administrator configuration options.
Checked = administrator remote management is enabled. (default)
•
• Unchecked = administrator remote management is disabled.
Enables or disables remote access to user configuration options.
Checked = user remote management is enabled.
•
• Unchecked = user remote management is disabled. (default)
By default, enabling remote management makes the device available to all IP addresses. To
limit remote management to a subset of IP addresses, uncheck All IP addresses, select
Single Address or Address Range from the drop-down list, enter the IP address or address
range in the fields, and click Add. The IP addresses appear in Permitted IP Addresses. To
delete an IP address or address range, click the address in Permitted IP Addresses and
click Delete. No precautionary message appears before you delete an IP address.
44
Description
to access the Web management interface. To