Thermo Scientific MAXQ SHKE435HP Operating And Maintenance Manual page 15

Section 1
Installation
Install Test Tube
1-8 Orbital Shaker
Holders
The Accessory Test Tube Racks and Test Tube Rack Holders are available
in four sizes and are listed in Table 1-2.
Table 1-2. Test Tube Racks and Holders
Part No.
950040
950060
600074
600075
600076
600077
600078
600079
600088
600089
600090
194024
All the Test Tube Rack Holders are adjustable into seven positions,
swinging and locking at 15°, 30° and 45° in either direction. Figure 1-13
illustrates the Test Tube Rack Holder with rack in place. To remove the
rack, spread the metal tabs on either end of the holder and lift out the
plastic Test Tube Rack.
Figure 1-13. Test Tube Rack Holder
Description
Test Tube Rack, 10-13 mm size
Test Tube Rack, 16-20 mm size
Test Tube Rack, 21-25 mm size
Test Tube Rack, 26-30 mm size
Adjustable-Angle Test Tube Holder w/ Rack, 10-13mm
Adjustable-Angle Test Tube Holder w/ Rack, 16-20mm
Adjustable-Angle Test Tube Holder w/ Rack, 21-25mm
Adjustable-Angle Test Tube Holder w/ Rack, 26-30mm
Universal Adjustable-Angle Test Tube Holder, 10-25mm
2 Tier Micro-Plate Rack
3 Tier Micro-Plate Rack
#10-24 pan head Phillips screws for mounting holders to platforms
Thermo Scientific