Yealink T41P User Manual page 113

identify the account, while a register name matched with a password is used for
authentication if the server requires. Display name is the caller ID that will display on the
callee's phone LCD screen. Server configuration may override the local configuration.
Why does the phone play a tone when hold? How to disable it?
When the phone is hold, it will play a hold tone every 30 seconds to prompt that the
phone is being hold status. The call hold tone feature is enabled by default. You can
disable it or change the interval to play a hold tone via web user interface only.
To configure the call hold tone and call hold tone delay via web user interface:
1. Click on Features->General Information.
2. Select Enabled or Disabled from the pull-down list of Play Hold Tone.
3. Enter the desired time in the Play Hold Tone Delay field.
4. Click Confirm to accept the change.
How to change the user password?
To change the user password via web user interface:
1. Click on Security->Password.
2. Select user from the pull-down list of User Type.
3. Enter the new user password in the New Password field and Confirm Password field.
Troubleshooting
109