Local Directory - Yealink T41P User Manual

User Guide for the SIP-T41P IP Phone
6. Click Confirm to accept the change.
Note
You can configure the directory via web user interface only.
To check the directory via phone user interface:
1. Press the Directory soft key when the phone is idle.
The phone LCD screen displays the enabled list(s) in the directory.
If there is only one list in the directory, pressing the Directory soft key will enter this list
directly.
Note
If the remote phonebook and LDAP features are not configured in advance, you cannot
see the remote phonebook and LDAP lists on the phone user interface. For more
information about the remote phonebook, refer to
more information about the LDAP, contact your system administrator.

Local Directory

The built-in phone directory can store the names and phone numbers of your contacts.
You can store up to 1000 contacts in your phone's local directory. There are four default
groups in the local directory: All Contacts, Company, Family and Friend. You can add
new groups and add new contacts to different groups in the local directory. You can
edit, delete or search for a contact in the local directory. You can also call a contact
from the local directory.
Adding Groups
To add a group to the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.
26
Remote Phonebook on page 35. For