Yealink T41P User Manual page 50

third page. The right bottom line key is used to switch pages.
The following figure shows an example:
The following table lists the page icon status:
Icons
1
2 3
You can configure the page icon and page switch key LED to indicate the different
status. This feature is disabled by default. For more information on the page switch key
LED status, refer to LED Instructions
The following table lists the page icon status for different states:
Icons Status
Fast flashing
To configure the page icon to indicate status via web user interface:
1. Click on DSSKey->Line Key.
2. Select Enabled in the Enable Page Tips field.
3. Click Confirm to accept the change.
Indicates the current page of the line keys.
Indicates the non-current page of the line keys.
on page 5.
The BLF monitored user receives an incoming call on the
non-current page.
The line receives an incoming call on the non-current page.
There is a hold call on the line on the on the non-current
page.
Customizing Your Phone
Description
Description
43