Simple Login Settings - Kyocera ECOSYS M4125idn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Simple Login Settings

The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
NOTE
• For user registration, refer to the following:
Adding a User (Local User List) (9-6)
• To use Simple Login, User Login Administration must be enabled in "User Login Settings".
Enabling User Login Administration (9-4)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
Enabling Simple Login
Select whether or not simple login is enabled.
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
2
[User Login Settings] > [Simple Login Settings] > [Simple Login]
2
Configure the settings.
Select [Off] or [On].
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1
[System Menu / Counter]key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
9-22