Kyocera ECOSYS M4125idn Operation Manual page 351

System Menu > [System/Network]
[Wi-Fi Settings]
Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Wi-Fi Settings]
Configure Wi-Fi settings.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-36) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-36 <Wireless Network Interface Kit> (12-3)
[Wi-Fi]
Item
Wi-Fi
[Setup]]
Item
Connection Status
Quick Setup
Available Network
WEP Key Index
Push Button Method
PIN Code Method
(Device)
Custom Setup
Select whether to use Wi-Fi.
Value: Off, On
This can be used to check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Displays access points to which the machine can connect. Select a desired access
point from the list.
Select the key index value that is set on the access point.
Value: 0 to 3
If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
The detailed settings for wireless LAN can be changed.
8-33
Description
Description