Simple Login Settings - Kyocera 7056i Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Simple Login Settings

The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
NOTE
• For user registration, refer to the following:
Adding a User (Local User List) (page 9-8)
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
Enabling Simple Login
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
7056i
8056i
2
"User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login" [Change]
[On] or [Off] > [OK]
Login User Name
7000
8000
9-27
Login Password
7000
8000