Preparation before Use > Using the Operation Panel
Displaying Keys That Cannot be Configured
Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.
Ready to copy.
Copy
Paper
Selection
Auto
100%
Duplex
1-sided>>1-sided
Off
Functions
ID Card Copy
NOTE
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case,
select the [Reset] key and try again.
If the key is still grayed out after the [Reset] key is selected, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
Using the [Enter] Key
The [Enter] key has the same function as keys with the Enter mark (←), such as the [OK←] key and the [Close←] key.
Normal
10:10
Copies
Zoom
Density
Normal 0
Combine
Collate/
Offset
Collate
Favorites
Ready to copy.
EcoPrint
Off
Grayed out
Ready to copy.
Copy
Paper
Zoom
Selection
Auto
100%
Duplex
Combine
1-sided>>1-sided
Off
Functions
ID Card Copy
In the following cases, the key is grayed out
and cannot be selected.
•
Cannot be used in combination with a
feature that is already selected.
•
Use prohibited by user control.
10:10
On
Cancel
OK
3-12
10:10
Copies
Density
Normal 0
Collate/
Offset
Off
Favorites