Printed Image Trouble - Kyocera ECOSYS M4125idn Operation Manual

Troubleshooting > General Troubles
Domain_name\user_name (for example, abcdnet\james.smith)
User_name@domain_name (for example, james.smith@abcdnet)

Printed Image Trouble

Image trouble is indicated by the symptoms in the table below. Implement appropriate procedures.
Symptom
The overall image is
too light.
The white parts of the
image seem to have a
grayish cast.
Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly).
Texts are not clearly
printed.
Checkpoints
Is the paper damp?
Have you changed the density?
Is the toner distributed evenly within
the toner container?
Is EcoPrint mode enabled?
―
―
Have you changed the density?
Is the original a printed photograph?
Did you choose appropriate image
quality for the original?
11-6
Corrective Actions
Replace the paper with new paper.
If the problem occurs frequently, turn
on the Cassette Heater switch.
Select appropriate density level.
Shake the toner container from side
to side several times.
Change the [EcoPrint] setting to [Off].
Run [Drum Refresh].
Make sure the paper type setting is
correct for the paper being used.
Select appropriate density level.
Change the [Original Image (Copy)]
or [Original Image (Send/Store)]
setting to [Photo].
Change [Original Image (Copy)] or
[Original Image (Send/Store)] to the
appropriate setting.
Reference
Page
3-17
2-5
6-16
8-59
10-4
6-18
11-26
8-9
6-16
8-59
6-17
6-17