Service Sets - WAGNER ZIP52 Finishing Operating Manual

VERSION 12 / 2012
OPERATING MANUAL
11.10

SERVICE SETS

Service sets for pump
Pump No. Diaphragm
U731.00 UHMWPE
U760.00 UHMWPE
U765.00 UHMWPE
U773.00 UHMWPE
Service set consists of: see parts list
O-ring set consists of:
4 O-rings for the valve units (material check valves)
Air valve set consists of:
1 Reversing valve
1 Reversing valve seals
1 Pressure cover seals
Service sets for Fine Flow Controller
Pump No. FFC-Service set
U731.00
U760.00
U765.00
U773.00
FFC-Service set consists of: see parts list
FFC-Sealing set consists of: see parts list
Incorrect maintenance/repair!
Risk of injury and damage to the device.
ORDER NUMBER DOC 2332848
Valve seat
Stainless steel Stainless steel
Stainless steel Stainless steel
Stainless steel Stainless steel
Stainless steel Stainless steel
FFC-Sealing set
T6193.00
T6193.00
T6193.00
T6193.00
WARNING
Have repairs and part replacements carried out only by specially
trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
Valve ball Service set
T9080.00
T9080.00
T9080.00
T9080.00
--
T6193.00
T6193.00
T6193.00
O-ring set Air valve set
T9077.00 P4003.00
T9077.00 P4003.00
T9077.00 P4003.00
T9077.00 P4003.00
63