Spare Parts; How Can Spare Parts Be Ordered - WAGNER ZIP52 Finishing Operating Manual

VERSION 12 / 2012
OPERATING MANUAL
11

SPARE PARTS

11.1

HOW CAN SPARE PARTS BE ORDERED?

Always supply the following information to ensure delivery of the right spare part:
Order number, designation and quantity
The quantity need not be the same as the number given in the quantity column "
on the list. This number merely indicates how many of the respective parts are used in
each module.
The following information is also required to ensure smooth processing of your order:
Address for the invoice
Address for delivery
Name of the person to be contacted in the event of any queries
Type of delivery (normal mail, express delivery, air freight, courier etc.)
Identifi cation in spare parts lists
Explanation of column " " (labeling) in the following spare parts lists:
Wearing part
Note: No liability is assumed for wearing parts.
Not part of standard equipment, available, however, as additional extra.
Incorrect maintenance/repair!
Risk of injury and damage to the device.
ORDER NUMBER DOC 2332848
WARNING
Have repairs and part replacements carried out by specially
trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
"
46