Touching Hot Surfaces; Explosion Azard; Noise Risk; Material Chemical Compatibility - WAGNER ZIP52 Finishing Operating Manual

Pneumatic double diaphragm pump spray pack
Hide thumbs Also See for ZIP52 Finishing:
Table of Contents

Advertisement

VERSION 12 / 2012
OPERATING MANUAL
4.2.6

TOUCHING HOT SURFACES

Touch hot surfaces only if you are wearing protective gloves.
When operating the unit with a coating material with a temperature of > 43 °C; 109.4 °F:
- Identify the unit with a warning sticker "Warning - hot surface".
Order No.
9998910
Instruction sticker
9998911
Protection sticker
Note: Order the two stickers together.
4.2.7

EXPLOSION AZARD

Never use chloride or halogenated solvents (such as trichloroethane and methylene
chloride) with units containing aluminium or galvanized and zinc-plated parts. They may
react chemically thus producing an explosion danger.
Read the classifi cation and information leafl et concerning the product and solvent to be
used.
4.2.8

NOISE RISK

In some working conditions, the pump can be particularly noisy: for example when the
air feeding pressure is high and when there is no pressure or a very low pressure in the
pumped fl uid (free fl ow operation). In these cases, all personnel working next to the pump
shall wear adequate individual protections and/or use valves and seats in plastic material,
provided the working conditions and the compatibility with the pumped fl uid allow it.
4.2.9

MATERIAL CHEMICAL COMPATIBILITY

Make sure the materials employed in manufacturing the pump are chemically compatible
with the fl uid to be pumped. A wrong choice can cause harming people (as a result of
prosection of noxious and irritant products) as well as polluting the environment, besides
prematurely damaging the pump and its hoses.
4.2.10

EMERGENCY STOP

To quickly stop the unit in case of emergency, close the air cut-off valve or the pressure
regulator; to interrupt the air supply to the pump's motor. For the ZIP52 PF Eco-Finishing,
the cut-off valve is not supplied with the pump. It has to be provided and properly installed
by the user.
Caution : delivery circuits of pneumatic pumps can remain pressurized, even when the air
input valve is closed.
ORDER NUMBER DOC 2332848
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zip52 pf eco-finishing

Table of Contents