VERSION 12 / 2012
OPERATING MANUAL
6
ASSEMBLY AND COMMISSIONING
6.1
TRANSPORTATION
The pump may be moved manually, without lifts and cranes.
6.2
STORAGE
Store the pump in a closed and dry environment.
Thoroughly clean the pump, if a long-term decommissioning is planned.
When resuming pump operation, proceed as described in the following sections.
Discharge of electrostatically charged components in atmospheres
containing solvents!
Explosion hazard from electrostatic sparks.
6.3
ASSEMBLY
Install the unit on a fl at and horizontal surface.
Ensure that all fi xing screws (diaphragm covers, manifold, etc.) are correctly tightened.
Tighten the fi xing screws regularly depending on pump use. In the case of continuous
or prolonged operation, it is advisable to check at least once a week that there are no air
and/or liquid leaks.
Inclined ground!
Risk of accidents if the unit rolls away/falls.
ORDER NUMBER DOC 2332848
WARNING
Clean the pump only with a damp cloth.
WARNING
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
25