Safety Parameters; Processible Materials - WAGNER ZIP52 Finishing Operating Manual

VERSION 12 / 2012
OPERATING MANUAL
2.4

SAFETY PARAMETERS

WAGNER accepts no liability for any damage arising from incorrect use.
Use the unit only to work with the materials recommended by WAGNER.
Operate only the entire unit.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
The operation of the pneumatic double diaphragm pump is only allowable under the
following conditions:
The operating staff have previously been trained on the basis of this operating
manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must
be observed.
The statutory requirements and accident prevention regulations standard in the
country of use must be observed.
2.5

PROCESSIBLE MATERIALS

Fluid materials like paints and varnishes.
Abrasive materials and pigments!
Greater wear of the parts carrying the material.
Use the application-oriented model (fl ow rate/cycle, material, valves, etc.) as
indicated in Section 5.3.2.
Check if the fl uids and solvents used are compatible with the pump construction
materials as indicated in Section 5.3.1.
ORDER NUMBER DOC 2332848
NOTICE
8