Appendix B: Connecting And Installing The Touchscreen - Enerzone Cambridge EP00075 Installation And Operation Manual

APPENDIX B: CONNECTING AND INSTALLING THE TOUCHSCREEN

It is possible to install the wall mount support at the back of the stove or on an adjacent wall.
To install it on the back of your stove:
Remove the screws already on the stove and use them to install the support on the stove.
To install on an adjacent wall:
BEFORE INSTALLING THE TOUCHSCREEN SUPPORT ON THE WALL, CONNECT THE TOUCH SCREEN
TO THE PRESSURE BOARD TO DETERMINE THE DISTANCE TO WHICH YOU CAN INSTALL THE
TOUCH SCREEN.
Secure the support to the wall with the appropriate hardware (not included). Use the 2 mounting
holes provided for this purpose on the support.
Connecting the touch screen
The wire that establishes the communication between your stove and the touch screen was plugged
during manufacturing. You only have to plug the other end into the touch screen by cutting the ty-rap
who holds it in place.
Cambridge Pellet Stove Installation and Operation Manual
CAUTION
85