Table of Contents
Advertisement
9.3.2 No Fuel
The stove ran out of pellets. Refill the hopper. Press "Reset" then "ON.
The burn pot holes are blocked. Remove the burn pot and clean it thoroughly.
The auger is jammed or auger motor failed. Go to the troubleshooting page on the LCD (see
Section 9.2 Testing Components) screen and test auger motors. If one of the motors is not
running check if motor is defective or if the auger is jammed.
56
HOPPER VALVE
A
Screws
B
Valve and motor assembly
Cambridge Pellet Stove Installation and Operation Manual
Advertisement
Table of Contents
