Table of Contents
Advertisement
THANK YOU FOR CHOOSING THIS ENERZONE PELLET STOVE
As one of North America's largest and most respected pellet stove, wood stove and fireplace
manufacturers, Stove Builder International takes pride in the quality and performance of all its
products. We want to help you get maximum satisfaction as you use this product.
In the pages that follow you will find general advice on pellet heating, detailed instructions for safe
and effective installation, and guidance on how to get the best performance from this stove as you
build and maintain your pellet heating system.
We highly recommend that our pellet burning hearth products be installed and serviced by
professionals who are certified in the United States by NFI (National Fireplace Institute
by WETT (Wood Energy Technology Transfer) or in Quebec by APC (Association des Professionnels du
Chauffage).
Congratulations on making a wise purchase.
If this appliance is not properly installed, combustible materials near it may overheat. To reduce the
risk of fire, follow the installation instructions in this manual exactly. Contact local building or fire
officials about restrictions and installation inspection requirements in your area.
Please read this entire manual before you install and use your new stove. You may need to get a
building permit for the installation of this appliance and the venting system that it is connected to.
Consult your municipal building department or fire department before installation. We recommend
that you also inform your home insurance company to find out if the installation will affect your
policy.
A primary heat source should be available in the home. This heating unit may serve as a
supplementary heat source. The manufacturer cannot be responsible for additional heating costs
associated with the use of an alternative heat source.
• THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE ALWAYS
OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER'S MANUAL,
CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
• MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING
COMPONENTS IS PROHIBITED AND WILL VOID THE WARRANTY. ANY MODIFICATION OF THE
FIREPLACE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING AUTHORITY IS
PROHIBITED AND VIOLATES CSA B365 (CANADA) AND NFPA 211 (USA).
• STOVE BUILDER INTERNATIONAL INC. (SBI) GRANTS NO WARRANTY, IMPLIED OR STATED, FOR
THE POOR INSTALLATION OR LACK OF MAINTENANCE OF YOUR APPLIANCE AND ASSUMES NO
RESPONSIBILITY OF ANY CONSEQUENTIAL DAMAGES.
2
CAUTION
Cambridge Pellet Stove Installation and Operation Manual
®
) or in Canada
Advertisement
Table of Contents
