Table of Contents
Advertisement
8.1.7 Glass Care
Clean door glass when necessary. The use of a stove glass cleaner is recommended. Regular
household glass cleaners will not remove creosote properly.
•
NEVER USE ABRASIVE CLEANERS ON THE GLASS OR ON ANY PLATED PART.
•
DO NOT CLEAN THE GLASS WHILE IT'S HOT.
•
DO NOT FORCE, STRIKE OR ADOPT ANY BEHAVIOUR THAT COULD WEAKEN THE GLASS DOOR.
•
DO NOT OPERATE THE STOVE WITH THE GLASS REMOVED, CRACKED OR BROKEN.
8.1.8 Replacement of Broken Door Glass
Carefully remove any loose pieces of glass from the doorframe. Dispose of all broken glass properly.
A broken glass must be replaced with an identical ROBAX (ceramic glass) 5 mm thick with the
dimensions 10 3/8'' x 10 3/8''. Refer to replacement parts section.
ALWAYS WEAR SUITABLE GLOVES WHILE HANDLING BROKEN GLASS.
•
REPLACEMENT GLASS SHOULD ONLY BE PURCHASED FROM AN AUTHORIZED DEALER (SEE
"REPLACEMENT PARTS'' SECTION). TEMPERED GLASS OR ORDINARY GLASS WILL NOT WITHSTAND THE
HIGH TEMPERATURES OF THE STOVE.
•
IF YOU HAVE TO CHANGE THE DOOR GLASS, MAKE SURE YOU INSTALL THE NEW GASKETS AT THE
SAME PLACE AS THE ORIGINAL IN ORDER TO KEEP THE AIRWASH WORKING PROPERLY.
8.1.9 Door Gasket Maintenance
It is important to maintain the door gasket in good condition. After a while, the gasket will wear and
compress; adjusting the door may then be required. If the door adjustment is not sufficient, replace
the door gasket with a genuine part. If the stove door is not properly sealed, it will be difficult to keep
the door glass clean and combustion gases may leak into the room.
Cambridge Pellet Stove Installation and Operation Manual
WARNING
WARNING
WARNING
49
Advertisement
Table of Contents
